World Journal of Dentistry

Register      Login

VOLUME 8 , ISSUE 5 ( September-October, 2017 ) > List of Articles


Degree of Conversion of Bulk Fill Composites at Different Depths

Mateus R Tonetto, Cinthia S Kubo, Livia B Campi, Helida GO Barud, Rafael R Domeneguetti, Alexandre Gatti, Edson A de Campos

Citation Information : Tonetto MR, S Kubo C, B Campi L, GO Barud H, R Domeneguetti R, Gatti A, A de Campos E. Degree of Conversion of Bulk Fill Composites at Different Depths. World J Dent 2017; 8 (5):398-402.

DOI: 10.5005/jp-journals-10015-1473

License: CC BY-SA 4.0

Published Online: 01-12-2017

Copyright Statement:  Copyright © 2017; The Author(s).


Aim: The aim of this study was to evaluate the degree of monomer conversion of bulk fill composites at different depths. Materials and methods: The bulk fill products tested were SDR™, SonicFill™ System, Venus® Bulk Fill, and Tetric Evo- Ceram® Bulk Fill. In addition, this study tested conventional composites that have been indicated for use in association with bulk fill composites (Venus® and Tetric EvoCeram®), as well as the Ceram X™ conventional composite. To analyze the degree of conversion (DC), specimens (n = 10) consisting of four individual portions through the depths of cure (1, 2, 3, and 4 mm) were created. These samples were ground, pressed with potassium bromine, and analyzed using Fourier-transform infrared (FT-IR) spectroscopy. Two-way analysis of variance (ANOVA) and Bonferroni post hoc methods were applied to the results (p < 0.05). Results: Venus® Bulk Fill exhibited the best results at all of the depths tested. None of the bulk fill composites considered herein exhibited any significant differences between the depths. Conventional composites were found to have significantly lower DCs at greater depths. Conclusion: The results show that when depth of cure is being considered, bulk fill composites may be used at thicknesses of up to 4 mm. Clinical significance: Bulk fill composites are indicated to be inserted in increments of up to 4 mm. In this sense, it is fundamental to determine DC in these depths to ensure obtaining adequate mechanical properties.

PDF Share
  1. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003 May- Jun;28(3):215-235
  2. Resin composite restorative materials. Aust Dent J 2011 Jun;56(Suppl 1):59-66
  3. Full in-vitro analyses of new-generation bulk fill dental composites cured by halogen light. Mater Sci Eng C Mater Biol Appl 2017 Aug;77:436-445
  4. Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater 1998 Jan;14(1):51-56
  5. Resin composites in dentistry: the monomer systems. Eur J Oral Sci 1997 Apr;105(2):97-116
  6. Effects of monomer ratios and highly radiopaque fillers on degree of conversion and shrinkage-strain of dental resin composites. Dent Mater 2009 Nov;25(11):1411-1418
  7. Effect of lightcuring exposure time, shade, and thickness on the depth of cure of bulk fill composites. Oper Dent 2017 Sp-Oct;42(5): 505-513
  8. Influence of lightpolymerization modes on the degree of conversion and mechanical properties of resin composites: a comparative analysis between a hybrid and a nanofilled composite. Oper Dent 2008 May-Jun;33(3):287-293
  9. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins. J Oral Rehabil 1990 Sep;17(5): 487-494
  10. Relationship between the degree of conversion and internal discoloration of light-activated composite. Dent Mater J 1995 Jun;14(1):23-30
  11. Properties of a silica-reinforced polymer for dental restorations. J Am Dent Assoc 1963 Jan;66:57-64
  12. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials 2003 Feb;24(4):655-665
  13. Effects of various resin composite (co)monomers and extracts on two caries-associated micro-organisms in vitro. J Dent Res 1998 Jan;77(1):60-67
  14. Development of a novel resin-based dental material with dual biocidal modes and sustained release of Ag ions based on photocurable core-shell AgBr/cationic polymer nanocomposites. J Mater Sci Mater Med 2017 Jul;28(7):103
  15. Cuspal deflection and depth of cure in resin-based composite restorations filled by using bulk, incremental and transtooth-illumination techniques. J Am Dent Assoc 2011 Oct;142(10):1176-1182
  16. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 1987 Nov;66(11):1636-1639
  17. Marginal quality of flowable 4-mm base vs. conventionally layered resin composite. J Dent 2011 Oct;39(10):643-647
  18. Depth of cure and mechanical properties of nano-hybrid resin-based composites with novel and conventional matrix formulation. Clin Oral Investig 2012 Oct;16(5):1425-1434
  19. Impact of light transmittance mode on polymerisation kinetics in bulk-fill resin-based composites. J Dent 2017 Aug;63:51-59
  20. In vitro comparison of mechanical properties and degree of cure of bulk fill composites. Clin Oral Investig 2013 Jan;17(1):227-235
  21. Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals. Dent Mater 2013 Sep;29(9):e213-e217
  22. The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res 1986 Jan;20(1):121-131
  23. Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites. J Dent 2013 Aug;41(8):695-702
  24. The influence of irradiation potential on the degree of conversion and mechanical properties of two bulk-fill flowable RBC base materials. Dent Mater 2013 Aug;29(8):906-912
  25. Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent 2014 Jul-Aug;39(4):374-382
  26. Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance. Oper Dent 2013 Nov-Dec;38(6):618-625
  27. Post-cure depth of cure of bulk fill dental resin-composites. Dent Mater 2014 Feb;30(2):149-154
  28. Infrared spectroscopy: a tool for determination of the degree of conversion in dental composites. J Appl Oral Sci 2008 Mar-Apr;16(2):145-149
  29. The effect of filler and silane content on conversion of resin-based composite. Dent Mater 2003 Jun;19(4):327-333
PDF Share
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.