World Journal of Dentistry

Register      Login

VOLUME 9 , ISSUE 6 ( November-December, 2018 ) > List of Articles

ORIGINAL RESEARCH

Effect of Mouthwashes on Frictional Properties of Gold-plated and Ordinary Stainless Steel Orthodontic Brackets

Noor M Garma, Hiba M Hussien, Mohammed Nahidh

Keywords : Chlorhexidine, Friction, Gold-plated brackets, Herbal mouth rinse

Citation Information : Garma NM, Hussien HM, Nahidh M. Effect of Mouthwashes on Frictional Properties of Gold-plated and Ordinary Stainless Steel Orthodontic Brackets. World J Dent 2018; 9 (6):489-494.

DOI: 10.5005/jp-journals-10015-1585

License: CC BY-NC 4.0

Published Online: 01-12-2018

Copyright Statement:  Copyright © 2018; Jaypee Brothers Medical Publishers (P) Ltd.


Abstract

Background: This study aimed to evaluate and compare the static frictional forces between the gold-plated and conventional stainless steel brackets following immersion in three types of mouthwashes. Materials and methods: Eighty orthodontic brackets (40 stainless steel and 40 gold-plated) were divided equally into four subgroups and dipped in 15 mL of different mouthwashes for 45 days. The mouthwashes included chlorhexidine, aloe vera, aloe vera with fluoride and distilled water as a control group. The brackets then attached to an experimental model consisted of acrylic block. Frictional resistance was measured on 0.019 × 0.025 inch stainless steel archwires using Tinius Olsen Instron universal testing machine. Independent sample t-test and one way ANOVA were used to analyze the collected data. Results: Gold-plated brackets showed high significant friction in comparison with stainless steel one in all mouthwashes. In both types of brackets, there was a statistically highly significant difference among different mouthwashes. Aloe vera mouthwash showed the highest friction with steel brackets while Chlorhexidine had a maximum effect on the frictional force with gold-plated bracket. Conclusion: During orthodontic treatment and when sliding mechanics with minimum friction is required, the orthodontist should prescribe fluoridated herbal mouth rinse with Goldplated brackets. Chlorhexidine should be excluded due to exaggerated frictional resistance that may impede or delay the intended tooth movement, from the same point of view, when using stainless steel brackets, chlorhexidine is the best mouth rinse, while herbal mouth rinse without fluoride (aloe vera mouthwash) is contraindicated. Clinical significance: Orthodontists should take care of prescribing mouth rinses to decrease their effects on the friction.


PDF Share
  1. Carrion-Vilches FJ, Bermudez MD, Fructuoso P. Static and kinetic friction force and surface roughness of different archwire- bracket sliding contacts. Dent Mater J 2015;34(5): 648-653.
  2. Zhang H, Guo S, Wang D, Zhou T, Wang L, Ma J. Effects of nanostructured, diamond like, carbon coating and nitrocarburizingon the frictional properties and biocompatibility of orthodontic stainless steel wires. Angle Orthod 2016; 86(5):782-788.
  3. Wichelhaus A, Geserick M, Hibst R, Sander FG. The effect of surface treatment and clinical use on friction in NiTi orthodontic wires. Dent Mater 2005;21(10):938-945.
  4. Frank CA, Nikolai RG. A comparative study of frictional resistances between orthodontic bracket and arch wire. Am J Orthod 1980;78(6):593-609.
  5. Cacciafesta V, Sfondrini MF, Scribante A, Klersy C, Auricchio F. Evaluation of friction of conventional and metal-insert ceramic brackets in various bracket-archwire combinations. Am J Orthod Dentofacial Orthop 2003;124(4):403-409.
  6. Kusy RP, Whitley JQ, Mayhew MJ, Buckthal JE. Surface roughness of orthodontic archwires via laser spectroscopy. Angle Orthod 1988;58(1):33-45.
  7. De Paola LG, Spolarich AE. Safety and efficacy of antimicrobial mouthrinses in clinical practice. J Dent hygiene 2007; 81(5):1-16.
  8. Sukontapatipark W, El-Agroudi MA, Selliseth NJ, Thunold K, Selvig KA. Bacterial colonization associated with fixed orthodontic appliances. A scanning electron microscopy study. Eur J Orthod 2001;23(5):475-484.
  9. Larrabee TM, Liu SS, Torres-Gorena A, Soto-Rojas A, Eckert GJ, Stewart KT. The effects of varying alcohol concentrations commonly found in mouth rinses on the force decay of elastomeric chain. Angle Orthod 2012;82(5):894-899.
  10. Brightman LJ, Terezhalmy GT, Greenwell H, Jacobs M, Enlow DH. The effect of a 0.12% chlorhexidine gluconate mouthrinse on orthodontic patients aged 11 through 17 with established gingivitis. Am J Orthod Dentofacial Orthop 1991;100(4):324-329.
  11. Grímsdóttir MR, Hensten-Pettersen A, Kullmann A. Proliferation of nickel-sensitive human lymphocytes by corrosion products of orthodontic appliances. Biomaterials 1994; 15(14):1157-1160.
  12. Walker MP, Ries D, Kula K, Ellis M, Fricke B. Mechanical properties and surface characterization of beta titanium and stainless steel orthodontic wire following topical fluoride treatment. Angle Orthod 2007;77(2):342-348.
  13. Tahmasbi S, Ghorbani M, Masudrad M. Galvanic corrosion of and ion release from various orthodontic brackets and wires in a fluoride-containing mouthwash. J Dent Res Dent Clin Dent Prospects 2015;9(3):159.
  14. Rafeeq RA, Saleem AI, Nissan LMK. Ions release from fixed orthodontic appliance in two different mouthwashes. J Bagh Coll Dentistry 2014;26(4):152-155.
  15. Park HY, Shearer TR. In vitro release of nickel and chromium from simulated orthodontic appliances. Am J Orthod 1983; 84(2):15615-15619.
  16. Hwang CJ, Shin JS, Cha JY. Metal release from simulated fixed orthodontic appliances. Am J Orthod Dentofacial Orthop 2001;120(4):383-391.
  17. Gandini P, Orsi L, Bertoncini C, Massironi S, Franchi L. In vitro frictional forces generated by three different ligation methods. Angle Orthod 2008;78(5):917-921.
  18. Kusy RP, Whitley JQ, Prewitt MJ. Comparison of the frictional coefficients for selected archwire-bracket slot combinations in the dry and wet states. Angle Orthod 1991;61(4): 293-302.
  19. Kahlon S, Rinchuse D, Robison JM, Close JM. In vitro evaluation of frictional resistance with 5 ligation methods and Gianelly-type working wires. Am J Orthod Dentofacial Orthop 2010;138(1):67-71.
  20. Redlich M, Mayer Y, Harari D, Lewinstein I. In vitro study of frictional forces during sliding mechanics of “reducedfriction” brackets. Am J Orthod Dentofacial Orthop 2003; 124(1):69-73.
  21. Stefanos S, Secchi AG, Coby G, Tanna N, Mante FK. Friction between various self-ligating brackets and archwire couples during sliding mechanics. Am J Orthod Dentofacial Orthop 2010;138(4):463-467.
  22. Nanjundan K, Vimala G. Evaluation of frictional resistance and surface characteristics after immersion of orthodontic brackets and wire in different chemical solutions: A comparative in vitro study. Indian J Dent Res 2016;27(5): 513-520.
  23. Eliades T, Brantley WA. Orthodontic application of biomaterials– A clinical guide. 1st ed. Amsterdam: Woodhead Publishing; 2017.
  24. Danaei SM, Safavi A, Roeinpeikar SM, Oshagh M, Iranpour S, Omidkhoda M. Ion release from orthodontic brackets in 3 mouthwashes. Am J Orthod Dentofacial Orthop 2011; 139(6):730-734.
  25. Yanase Y, Ioi H, Nishioka M, Takahashi I. Effects of sliding velocity on friction: An in vitro study at extremely low sliding velocity approximating orthodontic tooth movement. Angle Orthod 2014;84(3):451-458.
  26. Mohammed AA. Evaluation and comparison of frictional forces generated by three different ligation methods. A master thesis, Department of Orthodontics, College of Dentistry, University of Baghdad, Iraq, 2010.
  27. Nahidh M, Garma NM, Jasim ES. Assessment of ions released from three types of orthodontic brackets immersed in different mouthwashes: An in vitro study. J Contemp Dent Pract 2018;19(1):73-80.
  28. Charng T, Lansing F. Review of corrosion causes and corrosion control in a technical facility. TDA Progress Report, USA, 1982. pp. 145-156.
  29. Miyakawa Y. Friction and wear performance of gold and gold alloy films. Gold Bull 1980;13(1):21-30.
  30. Choi SH, Kang DY, Hwang CJ. Surface roughness of three types of modern plastic bracket slot floors and frictional resistance. Angle Orthod 2014;84(1):177-183.
  31. Mandsaurwala M, Kalia A, Gupta G, Hegde A, Mirdehghan N. Comparative evaluation of ion release from orthodontic mini-implants in 2 mouthwashes. Int J Oral Health Dent 2015; 1(4):177-181.
  32. Singh RK. Corrosion protection of stainless steel in vegetables by Aloe Vera juice. Int J Appl Engineering Technol 2012;2(3): 28-35.
  33. Alavi S, Farahi A. Effect of fluoride on friction between bracket and wire. Dent Res J (Isfahan) 2011;8(Suppl 1):S37-S42.
  34. Huang HH. Variation in surface topography of different NiTi orthodontic archwires in various commercial fluoridecontaining environments. Dent Mater 2007;23(1):24-33.
  35. Alavi S, Hosseini N. Load-deflection and surface properties of coated and conventional superelastic orthodontic archwires in conventional and metal-insert ceramic brackets. Dent Res J (Isfahan) 2012;9(2):133-138.
  36. Mangaiyarkarasi SP, Manigandan T, Elumalai M, Cholan PK, Kaur RP. Benefits of Aloe Vera in dentistry. J Pharm Bioallied Sci 2015; 7(Suppl 1): S255-S259.
PDF Share

© Jaypee Brothers Medical Publishers (P) LTD.